Rainy Days with Roy G. Biv

The temperature fell almost 30 degrees overnight on Thursday night, with the arrival of a beautiful thunder/lightning show and rivers of rain! When you live in the desert, you don’t complain about water, and the cooler temperature is also welcome.

I’ve also been traveling a LOT, so I needed some time in my Stamp Studio and the Global Design Project #gdp409 challenge was the excuse I needed to bring a rainbow to a rainy day:

Roy G. Biv is the name to remember when you are putting colors in rainbow order (Red, Orange, Yellow, Green, Blue, Indigo, Violet) but they can circle back around on a card (not so much on a rainbow in the sky)…feel free to start ANYWHERE in the lineup!

My colors were (in ROYGBIV order, not the order on the first card) Sweet Sorbet, Calypso Coral, Daffodil Delight, Parakeet Party, Tahitian Tide and Orchid Oasis (allowing Orchid Oasis to be both Indigo and Violet).

The disco ball is from a new bundle coming September 6th called Curved Occasions in black. OF COURSE, it needed bling! The champagne More Dazzle specialty paper is JUST like a disco ball, and a little strip on the top and bottom catches the light and gets the party started.

I cut the wave pattern using the Patchwork Pieces dies from all the colors and laid them out to line them up on 6 backgrounds:

SHHH…Don’t tell anyone, but I was so excited with the first one I tried, I ended up going in a backward order, and then got a bit befuddled on a few that didn’t survive…a complete paper crafter predicament. That’s the way the card crumples.

There is also a roller skate in the set, so I stamped it on the second card, just to see if I liked it.

What do you think? With – or without – the skate?

Seems fitting to post this card today to remember my brother, Mike (1977-2022) on his birthday (September 2), with such iconic images from the 1970s. Speaking of a spectrum of colors, this photo is of my siblings in 2004 and you can see how genetics can produce light and dark skin! Mike is second from the right, and I’m on the other end. Grateful to know I will see him again after this life and was blessed to have a short time with him here. Be intentional and loving in your time with your family!

3-D Dots On DSP

Hey! It’s good to see you here and know you’ll like the next 3-D embossed card idea. Are you pinning these ideas for inspiration when you want some texture on your cards and paper crafts?!

Stampin’ Up! has an embossing folder that matches the Countryside Inn Designer Series Paper – The Countryside Blossoms E.F. matches one of the patterns perfectly! – but you don’t have to have a matching design to emboss on Designer Series Paper. For this card, I debossed the 3-D Dots into a striped citrus pattern from the Delightfully Eclectic mega-pack:

You CAN combine dots & stripes!

I appreciate that the pattern on the paper hearkens back to my signature “Sweet Citrus” bundle, and in my Tips & Technique video, I used the HYBRID 3-D embossing folder to show you how that one CUTS & EMBOSSES at the SAME TIME!

That’s the third embossing folder from the Basics 3-D Embossing Folder Trio in the Online Exclusives section of my store, but I do have another card to share with you tomorrow.

Make your own ZESTY birthday card with the supplies listed below, and remember to save your BONUS DAYS coupons from July in a folder in your email so you can easily find them to SPEND in August!

Product List

New at SU!- Level Complete Pull-Tab Flip Card

Zelda is a big deal for my granddaughter, so when the June “New at SU!” blog hop theme was Kid’s Cards, I thought maybe someone else has kids playing video games this summer. The new LEVEL COMPLETE stamp set is great for the young, and young-at-heart!

I wanted this to be an interactive card, as gamers love to “play” and fidget, and this one flips open when the tab is pulled on the right:

I saw Aubrey (of the Stampin’ Jill team) create a Pull-Tab Flip Card last week, I wanted to put my own spin on it!

To make it easy to assemble, here are the measurements (supply list at bottom of post), then you can watch either or both videos to put it together (my pieces are different sizes than Aubrey’s, as my card pulls from the right and hers from the bottom) :

Card base: 4-1/2″ x 5-1/2″

First layer: 3-3/4″ x 5″, cut the smallest banner from the Stylish Shapes dies about 1/3 in from the left side for the mechanism to slide through before attaching to card base with dimensionals in each corner.

Mechanism: 1-1/2″ x 7″, scored at 4-7/8″ and 5-1/4″

Flip Layer: 2-3/4″ x 4-1/2″. Adhere this to the 3/8″ piece only, under the left edge of the layer.

Inside layers (2): 2-1/4″ x 3-1/2″

TIP: Use strong adhesive, such as Stampin’ Seal+ or Tear & Tape because this card will be tugged and pulled over and over again!

Give this card a try- it comes together quickly when you have all the pieces cut and ready! If you can’t make it today, PIN it/save it for later and I’d love to see your version.

Off you pop to one of the other kid-friendly card ideas around the world:

June 2023 New at SU! Hop: Kid’s Cards

Previous BlogNext Blog
1.iHeartCards2 (US) – Zany Zoo Platform Pop Up Card
2.scraphexe (DE) – Kleine Träume | Little Dreamers
3.Joni in the Spotlight Stamping (US)-Hello Ladybug
4.The Tantalizing Stamper (UK)- Supremely Awesome
5.The Joy of Stampin’ with Rachael (US)- Reach for the Stars
6.Creative Juice by Loni (US) – Level Complete Pull-Tab Flip Card
7.Carterie Plus (CA)- Carte d’enfant
8.Playing with Papercrafting (CA) – Reach for the Stars
9.TanjasKartenwelt (DE)- Zuckersüsser Zoo
10.De Kijkkast (NL) – Kid’s Card with Little Monkey
11.Nature’s INKspirations (US) – Beside Me
12.Tricia’s Stamping Creations (US) – Zany Zoo
13.247Inkspiration (US) – Little Monkey
14.My Flutterby Moments (US)- It’s A Science Stamp Set
15.Stamping Flair (AU) – Construction Zone

Powered by blogcarousel.com

Product List

4 Backgrounds from 6×6 Paper: Corner Angle Layer Card

BREAKING NEWS: FREE SHIPPING day just announced! Set an alarm for Wednesday, June 21st and earn free shipping on your orders over $75 that day only!

Paper crafters pride themselves on using scraps, so when we find a way to NOT WASTE A PIECE of pretty paper, we must give it a try!

I appreciated this idea from fellow demonstrator Rachel Tessman, and with the Glorious Gingham Designer Series Paper ON SALE through June, knew it was time to share it with you! It’s a fabulous way to get 4 angled corner backgrounds from one 6″ x 6″ piece of Designer Series Paper, and you’ll love how simple it is.

Lay a ruler down and mark 1-1/2″ on each bottom right corner as you rotate the paper 90-degrees four times. Mark it on the BACK SIDE of the paper you want to use, then you don’t have to worry about erasing lines! Then connect the marks across from each other like this:

Use your Paper Trimmer to cut along each of your lines and you’ll have 4 angled pieces to put in the corners of your card fronts:

My card base is Thick Basic White Card stock: 5-1/2″ x 8-1/2″, scored in half at 4-1/4″

Pretty Peacock card stock: 5-1/8″ x 3-7/8″

Basic White card stock: 5″ x 3-3/4″

I used the So Refreshing Bundle to complete my cards, and here’s a video to watch & learn how to:

Filled my pitcher with “water” and stuck in the flowers:

Let me know if you try it, or share your version in my Creative Corner Facebook Group for my V.I.C.’s (Very Important Crafters). Now turn up the alarm to remind you to order on Free Shipping Day and add these supplies to your cart:

Product List

Pinwheel Tower Card

You are going to want to make this card, believe me!

Since most of our Designer Series Paper is discounted through June 30th, I’ll be demonstrating some projects to inspire you to pull out your patterned paper and use every last scrap. You can set an alarm for Mondays and join me live on my Facebook Page or YouTube Channel at 12:30 pm MT, or watch the replay at your convenience.

Without further adieu, here is the fabulous Pinwheel Tower Card I taught today:

It opens up to stand and displays 4 panels! This card is best created in landscape orientation, giving you plenty of area on each panel to decorate or write a message. The finished size of this card (laying flat) is 4.25″ x 5.5″, so it fits into our Basic Medium Stampin’ Up! envelopes perfectly.

You’ll be delighted at how EASY this fancy card is to create and if you want to craft along with my video below, gather these supplies:

  1. One 4-1/4″ x 4-1/4″ piece of Designer Series Paper
  2. Four pieces of 2-1/2″ x 4″ Designer Series Paper that coordinate (don’t have to be the same pattern, but from the same pack) with another four 1-1/2″ x 4″ pieces of Designer Series Paper.
  3. Four 2-3/4″ x 4-1/4″ panels of card stock that match one of the colors from your Designer Series Paper
  4. Simply Scored Board (or paper trimmer with scoring blade)
  5. Adhesive

Once you’ve made a Pinwheel Tower Card, you may want to make a larger version in a slimline card, which could also be a “mini album” if you add photos to some of the panels!

This version is 9″ x 4″ when flat, so it fits into a legal envelope (don’t forget to stamp your envelope, too).

For this larger version, here are the supplies you’ll need (and adjusted measurements):

  1. One 4″ x 4-1/4″ piece of Designer Series Paper (still score along the longest side at each inch)
  2. Four pieces of 3-3/4″ x 4-1/4″ Designer Series Paper (or cardstock) with another four 3-1/4″ x 3-3/4″ pieces of Designer Series Paper (or cardstock and scraps of Designer Series Paper, as shown)
  3. Four 4-1/2″ x 4″ panels of card stock that match one of the colors from your Designer Series Paper
  4. Simply Scored Board (or paper trimmer with scoring blade)
  5. Adhesive

I used the BRIGHT & BEAUTIFUL Designer Series Paper along with the Sweetest Cherries stamps and Cherry builder punch on the Slimline version, and will list the supplies for the Hello, Irresistible original card below.

REMEMBER THE PAPER IS ON SALE THROUGH JUNE 30, 2023 – SAVE 15%!

Product List

Circling Round to Monochromatic Colors (Plus 3 for FREE)

It’s been fun to teach color theory in May and I really hope you’ve learned some skills to help you choose palettes for your paper crafting and rubber stamping projects! Today, I “circled around” to MONOCHROMATIC schemes, which isn’t limited to only one color, but can include 2 or 3 variations of the same HUE. Here are a few examples:

Stampin’ Up! yellows are a exquisite example of how 3 different tints, tones or shades can harmonize well: Crushed Curry (card base), Daffodil Delight (sentiment and banner) and NEW Lemon Lolly (focal point) are different depths of the same sunny color and coordinate together!

We have a variety of purples, and not all of them start in the same corner of the color wheel, so this is where you need to learn to “see” harmonizing colors. The three I used for this card were Gorgeous Grape (card base), Highland Heather (larger banner and cupcake frosting) and Fresh Freesia (background and cupcake liner).

The tutorial for this card style includes further explanation:

I chose to use the Circle Sayings Bundle for our lesson on monochromatic color ideas because I have an exclusive opportunity through June 15th for you: Purchase the bundle from my Stampin’ Store and you’ll receive 3 never-seen project tutorials PLUS the consumable supplies to create all three projects! You’ll get the tutorials via email and the supplies in the mail by June 30th.

Let me share a few additional Stampin’ Up! color trios that work well as monochromatic combinations. These are NOT all the possible pairings, only a few I came up with to get your juices flowing:

Now it’s your turn to give a “monochromatic” card a try!

Product List

Inside the cards:

Vellum Overlay Ladybug Birthday Card

I challenged my Sprinkled Ink team to use Vellum this month, and what kind of leader would I be if I didn’t do what I asked them to do? So it was delightful when Friday’s TGIF challenge went right along with it! Plus, I got to pull out my Ladybug builder punch to create Polished Pink bugs for a birthday card, so who wouldn’t have fun with that?

Have you played with the Vellum Basics Specialty Designer Series Paper? With SIX 12″x12″ pieces of printed vellum – 2 each of stripes, polka dots, and this pretty leafy vine that I used – it’s gives a soft layer of texture, which I enhanced by heat-embossing the blossoms on top of:

While I stamped and punched out the ladybugs for the Polished Pink version of the card, you can also just use the Ladybug Builder punch to punch the pieces out and stamp the polka-dots on the wings, as in the Real Red version-

You’ll have such an enjoyable time putting together these cards, and remember to order some Brushed Brass Butterfly embellishments to include inside your card as the birthday gift!

Here’s a step-by-step video to make it easy for you – simply pause the video and collect the pieces you need to create along with me.

Click the links to add the supplies you’ll need to your cart (Stitched Rectangle dies and Cut & Emboss machine are optional):

Product List

THE BEST DEAL is always the Starter Kit!! Add $125 of the products you want to your Starter Kit and only pay $99…PLUS, save every time you shop, and be a part of my fabulous Sprinkled Ink team of Stampin’ Up! demonstrators. It’s a WIN/WIN opportuntiy!

Radiating Stitches In Color Birthday Card

Have you taken the time to explore the new Online Exclusives in my Stampin’ Up! Store? Some things have been so popular, they are already backordered and we are waiting for more!

One new item I wanted to share with you is the Radiating Stitches Dies…these cutting tools will take ANY stamps you already have and give them a pretty frame or add a bit of whimsy with a layer of “stitching” around the edges of your layers:

I chose to follow the Freshly Made Sketch #576 during my Live Crafting today and used two In Color Combinations to demonstrate the versatility of starting with a sketch, and the ease of using a combination of colors curated in a color “family”.

It happens that from today through Mid-April, I have 10 family birthdays (and about 15 friend and team birthdays) to celebrate, so this was an opportunity to get prepared!

This version I turned sideways and used the 2022-2024 In Colors as my palette. A sketch can be turned any which-way!

And this card followed the portrait layout of the original sketch, plus I used a base of Very Vanilla with my colors from the (retiring) 2021-2023 In Colors. All supplies listed below to make it easy to add to your cart!

Product List

A Zesty Birthday, with Stripes!

Put on your sunnies for this amaZING birthday card, with a lot of ZEST!

Why not have ALL the citrus? I’m squeezing the most out of this Sweet Citrus bundle from the mini catalog…it’s been so much fun to play with!

I’m going through my strips of card stock now, looking for more ways to incorporate bold stripes on my projects, because this one turned out just so cheery! Make your own by printing out the tutorial below.

Product List

Ride On Birthday Card

Often I am pleasantly surprised by a suite of Stampin’ Up! products that I didn’t expect to love. The Ready to Ride Suite is a perfect example!

While my single motorcycle riding experience didn’t endear me to riding the big bikes, I can see where the wind-in-your-hair-open-road-big-sky kind of day could be very appealing. This collection of products: Legendary Ride stamps and coordinating Dies, Metal Plat Embossing Folder and most spectacularly, the Ready to Ride 12″ x 12″ Designer Series Paper…all come together in SUCH an AWESOME way for some revved-up greeting cards like this one I demonstrated today:

There are a few tricks I wanted to show you about easily cutting and adhering the pieces to create a very detailed motorcycle…and the video begins with an unboxing of a LIMITED EDITION Boho Blue Mini Cut & Emboss Machine (with details on how you can get it!):

To help you put it together, I made this Motorcycle piece guide. You can change colors and “chrome” as desired…on my card, I used the gunmetal silver foil sheet and the bright silver is shown below. Feel free to print off the picture and slide it into your die envelope or stamp case to refer to when building your bike!

If you are “Ready to Ride”…these are the supplies you’ll need:

Product List

Did that Boho Blue Mini Cut & Emboss call your name? Join my team during Sale-a-Bration (January-February 2023) and you could choose Starter Kit option #1 to receive this Limited Edition machine PLUS choose $175 in products for just $129!

If you have questions about the starter kit or any of the products/techniques used here, shoot me a message and I’m happy to help!